1   2   3   4   5   6   7   8   9   10   11  

Indiana Governor Mike Pence Visits the Vincennes University HTEC

CNC Machinist NOW Students Design and Machine a Commemorative Plaque for Governor Pence
Wednesday, October 22, 2014

On October 16, 2014 Indiana Governor Mike Pence made a stop in the HTEC CNC lab during his visit to Vincennes University. Governor Pence was greeted by the CNC Machinist NOW students who were anxious to have the Governor press the green cycle start button on the Haas VF2 in order to complete the machining of the commemorative plaque that they had designed, setup and machined. The students milled the basic shape of the plaque, powder coated it gloss black, and then engraved the details, all except the outline of the state of Indiana and a star representing Vincennes. After Governor Pence comple . . .

New CNC Machinist NOW Video Produced

by VU Electronic Media Faculty and Students
Tuesday, October 14, 2014

The faculty and students from the Electronic Media program at Vincennes University produced a four minute video highlighting students and graduates of the CNC Machinist NOW program. The video production team consisted of faculty members Tom Young and Nicole Carrie, and students Matt Drescher, Haylee Leeds, Danyelle Long, Robert Murphy, Tommy Pool, Brody Shaffer, and Chad Staylee. Thank you to everyone that played a part in the production. A special thanks also goes out to Flying-S, Inc. and Stark Industries. To view the video, please click on the title link above, then click on the Youtube lin . . .

Third 16 Week CNC Machinist NOW Class Underway

Chips are flying in the VU Haas Machines!
Friday, September 19, 2014

September 2, 2014 marked the beginning of a new 8 hour per day, 5 days per week, 16 week, 600 hour CNC Machinist NOW class. 11 Veteran and Civilian adult students from Indiana and Illinois have already completed 1 of 6 NIMS credentials, and they are busy working hard to achieve the rest. Students are also working on Immerse2Learn LearnHaasCNC and Mastercam University online training outside of class time. "We have a great group" says Instructor Bob Nash, "This is a lot of fun". Doug Bowman, VU HTEC Director credits the VA, the WorkOne Service Centers, the Gene Haas Foundation, and the VU Found . . .

VU HTEC Students Attend IMTS in Chicago

VU Foundation Sponsors Trip to See the Latest Advanced Manufacturing Technology
Friday, September 19, 2014

Aound 12 noon on Friday, September 12, 2014 the VU bus load of about 30 students and teachers pulled into the parking lot of the McCormick Place Convention Center in Chicago IL after a 5 hour ride. For the next 6 hours the travelers were treated to endless displays and demonstrations of the latest advanced manufacturing technology on the planet. The group joined Doug Bowman who was manning the VU HTEC booth for the week, and graduate Robert Simms who was running the Haas VF-2 in the HTEC booth, to take in the show. Special guests included Professor Mark Scott and 8 of his Pike Central High Sc . . .

Ground Broken for VU Lebanon HTEC / HFO Facility

Closing skills gap in central Indiana receives boost
Thursday, August 7, 2014

LEBANON, Ind. – Central Indiana residents and manufacturing companies will receive a boost in 2015, thanks to a new training center that will be under construction this fall in Lebanon.

Ground was broken July 26 for the Gene Haas Training and Education Center in the Lebanon Industrial Park, located adjacent to I-65. The 20,000 square foot facility is planned to open in August 2015, immediately providing training to close a skills gap for machinists needed by manufacturers in central Indiana.

“We have to look to the future and we need a trained workforce. And this is the perfect . . .

Vincennes University HTEC CNC Training Center Celebrates Receiving NIMS Accreditation

Sandvik donates tooling for 2 new Haas ST-10Y lathes
Tuesday, April 1, 2014

VINCENNES, Ind. - Vincennes University’s Haas Technical Education Center is the recipient of accreditation from the National Institute for Metalworking Skills (NIMS).

Jim Wall, executive director of the NIMS, recently presented the accreditation to VU President Dick Helton. Wall said the accreditation process is designed to recognize quality metalworking training programs nationally.

“In my humble opinion, you have one of the best - if not the best - programs at Vincennes University that we have seen anywhere in the country,” Wall said.

Helton thanked Wall and said tha . . .

1   2   3   4   5   6   7   8   9   10   11  
HTEC Terms and Conditions
es fr pt

Terms and Conditions

Your access and use of the Haas Automation - HTEC Network website (the "Site") ( is subject to the following terms and conditions ("Terms and Conditions") and all applicable laws. By accessing and browsing the Site, you accept, without limitation or qualification, the Terms and Conditions and acknowledge that any other agreements between you and Haas Automation, Incorporated are superseded and are of no force or effect.

1. You should assume, unless otherwise noted, that everything you see or read on the Site is copyrighted and may not be used, except as provided in these Terms and Conditions or in the text on the Site, without the written permission of Haas Automation, Incorporated. Haas Automation, Incorporated neither warrants nor represents that your use of materials displayed on the Site will not infringe rights of third parties not owned by or affiliated with Haas Automation, Incorporated.

2. While Haas Automation, Incorporated uses reasonable efforts to include accurate and up to date information on the Site, Haas Automation, Incorporated makes no warranties or representations as to its accuracy. Haas Automation, Incorporated assumes no liability or responsibility for any errors or omissions in the content on the Site.

3. Your use and browsing of the Site is at your risk. Neither Haas Automation, Incorporated nor any other party involved in creating, producing, or delivering the Site is liable for any direct, incidental, consequential, indirect, or punitive damages arising out of your access to, or use of, the Site. Without limiting the foregoing, everything on the Site is provided to you "As Is," without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability, fitness for a particular purpose, or non infringement. Please note that some jurisdictions may not allow the exclusion of implied warranties, so some of the above inclusions may not apply to you. Check your local laws for any restrictions or limitations regarding the exclusion of implied warranties. Haas Automation, Incorporated also assumes no responsibility, and shall not be liable for any damages due to computer viruses that may infect your computer equipment or other property on account of your access to, use of, or browsing in the Site, or your downloading of any materials, data, text, images, video, or audio from the Site.

4. Any communication or material you transmit to the Site by electronic mail or otherwise, including any data, questions, comments, suggestions, or the like, is and will be treated as non confidential and non proprietary. Anything you transmit or post may be used by Haas Automation, Incorporated or its affiliates for any purpose, including but not limited to reproduction, disclosure, transmission, publication, broadcast, and posting. Furthermore, Haas Automation, Incorporated is free to use any ideas, concepts, knowhow, or techniques contained in any communications you send to the Site for any purpose whatsoever, including but not limited to developing, manufacturing, and marketing products using such information. Images of people or places displayed on the Site are either the property of or used with permission by Haas Automation, Incorporated. The use of these images by you, or anyone else authorized by you, is prohibited unless specifically permitted by these Terms and Conditions or specific permission provided elsewhere on the Site. Any unauthorized use of the images may violate copyright laws, trademark laws, the laws of privacy and publicity, and communications regulations and statutes.

5. Unless otherwise noted, the trademarks, logos, and service marks (collectively the "Trademarks") displayed on the Site are registered Trademarks of Haas Automation, Incorporated. Nothing contained on the Site should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any Trademark displayed on the Site without the written permission of Haas Automation, Incorporated or such third party that may own any Trademarks displayed on the Site. Your misuse of the Trademarks displayed on the Site, or any other content of the Site, except as provided in these Terms and Conditions, is strictly prohibited. You are also advised that Haas Automation, Incorporated will aggressively enforce its intellectual property rights to the fullest extent of the law, including the seeking of criminal prosecution.

6. Haas Automation, Incorporated has not reviewed all of the sites linked to this Site (if any) and is not responsible for the contents of any off Site page or any other sites linked to this Site. Your linking to any other off Site pages or other sites is at your own risk. Although Haas Automation, Incorporated may from time to time monitor or review discussions, chats, postings, transmissions, bulletins boards, and the like that may appear on the Site, Haas Automation, Incorporated is under no obligation to do so and assumes no responsibility or liability arising from the content of any such locations, nor for any error, defamation, libel, slander, omission, falsehood, obscenity, pornography, profanity, danger, or inaccuracy in any information contained within such locations on the Site. You are prohibited from posting or transmitting any unlawful, threatening, libelous, defamatory, obscene, scandalous, inflammatory, pornographic, or profane material or any material that could constitute or encourage conduct that would be considered a criminal offense, give rise to civil liability, or otherwise violate any law. Haas Automation, Incorporated will fully cooperate with any law enforcement authorities or court order requesting or directing Haas Automation, Incorporated to disclose the identity of anyone posting any such information or materials.

7. Haas Automation, Incorporated may at any time revise these Terms and Conditions by updating this posting. You are bound by any such revisions and should therefore periodically visit this page to review the then current Terms and Conditions to which you are bound.

(or press ESC or click the overlay)